页次： 1
* Messages for package sys-libs/gpm-1.20.7-r5:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package net-wireless/wpa_supplicant-2.10-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package net-misc/networkmanager-1.40.6:
* Unable to find kernel sources at /usr/src/linux
* Messages for package sys-libs/glibc-2.36-r6:
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package acct-group/colord-0:
* Adding group colord
* Messages for package acct-group/plugdev-0-r1:
* Adding group plugdev
* Messages for package acct-group/polkitd-0-r1:
* Adding group polkitd
* Messages for package acct-group/lpadmin-0-r1:
* Adding group lpadmin
* Messages for package dev-libs/ell-0.54:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package acct-group/messagebus-0-r1:
* Adding group messagebus
* Messages for package acct-user/polkitd-0-r1:
* Adding user polkitd
* Messages for package acct-user/colord-0:
* Adding user colord
* Messages for package acct-user/messagebus-0-r1:
* Adding user messagebus
* Messages for package app-alternatives/bzip2-1:
* This package will overwrite one or more files that may belong to other
* packages (see list below). You can use a command such as `portageq
* owners / <filename>` to identify the installed package that owns a
* file. If portageq reports that only one package owns a file then do
* NOT file a bug report. A bug report is only useful if it identifies at
* least two or more packages that are known to install the same file(s).
* If a collision occurs and you can not explain where the file came from
* then you should simply ignore the collision since there is not enough
* information to determine if a real problem exists. Please do NOT file
* a bug report at https://bugs.gentoo.org/ unless you report exactly
* which two packages install the same file(s). See
* https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
* to solve the problem. And once again, please do NOT file a bug report
* unless you have completely understood the above message.
*
* Detected file collision(s):
*
* /bin/bzcat
* /bin/bunzip2
* /bin/bzip2
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'app-alternatives/bzip2-1' merged despite file collisions. If
* necessary, refer to your elog messages for the whole content of the
* above message.
* Messages for package app-alternatives/gzip-0:
* This package will overwrite one or more files that may belong to other
* packages (see list below). You can use a command such as `portageq
* owners / <filename>` to identify the installed package that owns a
* file. If portageq reports that only one package owns a file then do
* NOT file a bug report. A bug report is only useful if it identifies at
* least two or more packages that are known to install the same file(s).
* If a collision occurs and you can not explain where the file came from
* then you should simply ignore the collision since there is not enough
* information to determine if a real problem exists. Please do NOT file
* a bug report at https://bugs.gentoo.org/ unless you report exactly
* which two packages install the same file(s). See
* https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
* to solve the problem. And once again, please do NOT file a bug report
* unless you have completely understood the above message.
*
* Detected file collision(s):
*
* /bin/gzip
* /bin/gunzip
* /bin/zcat
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'app-alternatives/gzip-0' merged despite file collisions. If
* necessary, refer to your elog messages for the whole content of the
* above message.
* Messages for package app-alternatives/awk-3:
* This package will overwrite one or more files that may belong to other
* packages (see list below). You can use a command such as `portageq
* owners / <filename>` to identify the installed package that owns a
* file. If portageq reports that only one package owns a file then do
* NOT file a bug report. A bug report is only useful if it identifies at
* least two or more packages that are known to install the same file(s).
* If a collision occurs and you can not explain where the file came from
* then you should simply ignore the collision since there is not enough
* information to determine if a real problem exists. Please do NOT file
* a bug report at https://bugs.gentoo.org/ unless you report exactly
* which two packages install the same file(s). See
* https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
* to solve the problem. And once again, please do NOT file a bug report
* unless you have completely understood the above message.
*
* Detected file collision(s):
*
* /bin/awk
* /usr/bin/awk
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'app-alternatives/awk-3' merged despite file collisions. If
* necessary, refer to your elog messages for the whole content of the
* above message.
* Messages for package app-alternatives/cpio-0:
* This package will overwrite one or more files that may belong to other
* packages (see list below). You can use a command such as `portageq
* owners / <filename>` to identify the installed package that owns a
* file. If portageq reports that only one package owns a file then do
* NOT file a bug report. A bug report is only useful if it identifies at
* least two or more packages that are known to install the same file(s).
* If a collision occurs and you can not explain where the file came from
* then you should simply ignore the collision since there is not enough
* information to determine if a real problem exists. Please do NOT file
* a bug report at https://bugs.gentoo.org/ unless you report exactly
* which two packages install the same file(s). See
* https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
* to solve the problem. And once again, please do NOT file a bug report
* unless you have completely understood the above message.
*
* Detected file collision(s):
*
* /bin/cpio
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'app-alternatives/cpio-0' merged despite file collisions. If
* necessary, refer to your elog messages for the whole content of the
* above message.
* Messages for package app-alternatives/tar-0:
* This package will overwrite one or more files that may belong to other
* packages (see list below). You can use a command such as `portageq
* owners / <filename>` to identify the installed package that owns a
* file. If portageq reports that only one package owns a file then do
* NOT file a bug report. A bug report is only useful if it identifies at
* least two or more packages that are known to install the same file(s).
* If a collision occurs and you can not explain where the file came from
* then you should simply ignore the collision since there is not enough
* information to determine if a real problem exists. Please do NOT file
* a bug report at https://bugs.gentoo.org/ unless you report exactly
* which two packages install the same file(s). See
* https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
* to solve the problem. And once again, please do NOT file a bug report
* unless you have completely understood the above message.
*
* Detected file collision(s):
*
* /bin/tar
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'app-alternatives/tar-0' merged despite file collisions. If
* necessary, refer to your elog messages for the whole content of the
* above message.
* Messages for package app-alternatives/lex-0-r1:
* This package will overwrite one or more files that may belong to other
* packages (see list below). You can use a command such as `portageq
* owners / <filename>` to identify the installed package that owns a
* file. If portageq reports that only one package owns a file then do
* NOT file a bug report. A bug report is only useful if it identifies at
* least two or more packages that are known to install the same file(s).
* If a collision occurs and you can not explain where the file came from
* then you should simply ignore the collision since there is not enough
* information to determine if a real problem exists. Please do NOT file
* a bug report at https://bugs.gentoo.org/ unless you report exactly
* which two packages install the same file(s). See
* https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
* to solve the problem. And once again, please do NOT file a bug report
* unless you have completely understood the above message.
*
* Detected file collision(s):
*
* /usr/bin/lex
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'app-alternatives/lex-0-r1' merged despite file collisions. If
* necessary, refer to your elog messages for the whole content of the
* above message.
* Messages for package app-alternatives/yacc-1-r2:
* This package will overwrite one or more files that may belong to other
* packages (see list below). You can use a command such as `portageq
* owners / <filename>` to identify the installed package that owns a
* file. If portageq reports that only one package owns a file then do
* NOT file a bug report. A bug report is only useful if it identifies at
* least two or more packages that are known to install the same file(s).
* If a collision occurs and you can not explain where the file came from
* then you should simply ignore the collision since there is not enough
* information to determine if a real problem exists. Please do NOT file
* a bug report at https://bugs.gentoo.org/ unless you report exactly
* which two packages install the same file(s). See
* https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
* to solve the problem. And once again, please do NOT file a bug report
* unless you have completely understood the above message.
*
* Detected file collision(s):
*
* /usr/bin/yacc
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'app-alternatives/yacc-1-r2' merged despite file collisions.
* If necessary, refer to your elog messages for the whole content of the
* above message.
* Messages for package dev-lang/perl-5.36.0-r1:
* UPDATE THE PERL MODULES:
* After updating dev-lang/perl the installed Perl modules
* have to be re-installed. In most cases, this is done automatically
* by the package manager, but subsequent steps are still recommended
* to ensure system consistency.
*
* You should start with a depclean to remove any unused perl dependencies
* that may confuse portage in future. Regular depcleans are also encouraged
* as part of your regular update cycle, as that will keep perl upgrades working.
* Recommended: emerge --depclean -va
*
* You should then call perl-cleaner to clean up any old files and trigger any
* remaining rebuilds portage may have missed.
* Use: perl-cleaner --all
* Messages for package sys-apps/coreutils-9.1-r2:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/pam-1.5.2-r3:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | grep -E -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package perl-core/Encode-3.120.0:
* Unable to establish //usr/bin/encguess symlink
* Unable to establish //usr/share/man/man1/encguess.1.bz2 symlink
* Messages for package perl-core/CPAN-2.290.0-r1:
* Removing dead symlink //usr/bin/cpan-mirrors
* Removing dead symlink //usr/share/man/man1/cpan-mirrors.1.bz2
* Messages for package media-fonts/urw-fonts-2.4.9:
* If you upgraded from urw-fonts-2.1-r2 some fonts will look a bit
* different. Take a look at bug #208990 if interested.
* Messages for package media-fonts/liberation-fonts-2.1.5:
* The following fontconfig configuration files have been installed:
*
* 60-liberation.conf
*
* Use `eselect fontconfig` to enable/disable them.
* Messages for package app-misc/ca-certificates-20211016.3.86:
* Removing the following broken symlinks:
* /etc/ssl/certs/4304c5e5.0 -> Network_Solutions_Certificate_Authority.pem
* /etc/ssl/certs/03179a64.0 -> Staat_der_Nederlanden_EV_Root_CA.pem
* /etc/ssl/certs/349f2832.0 -> EC-ACC.pem
* Messages for package dev-libs/libinput-1.22.0:
* Install additional packages for optional runtime features:
* dev-python/python-libevdev for measure and replay tools
* Messages for package net-misc/dhcpcd-9.4.1:
*
* dhcpcd has zeroconf support active by default.
* This means it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the noipv4ll configuration
* file option or the -L command line switch.
* See the dhcpcd and dhcpcd.conf man pages for more details.
*
* Dhcpcd has duid enabled by default, and this may cause issues
* with some dhcp servers. For more information, see
* https://bugs.gentoo.org/show_bug.cgi?id=477356
*
* If you activate the lookup-hostname hook to look up your hostname
* using the dns, you need to install net-dns/bind-tools.
* Messages for package media-libs/fontconfig-2.14.1-r1:
* Please make fontconfig configuration changes using `eselect
* fontconfig`. Any changes made to /etc/fonts/fonts.conf will be
* overwritten. If you need to reset your configuration to upstream
* defaults, delete the directory /etc/fonts/conf.d/ and re-emerge
* fontconfig.
*
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/fontconfig-2.14.1-r1/README.gentoo*
* for future reference)
* Messages for package sys-devel/gcc-12.2.1_p20221210:
* No pre-generated info pages in tarball. Allowing regeneration with texinfo...
* Messages for package dev-libs/glib-2.74.3-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package dev-qt/qtcore-5.15.7:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Generated gentoo-qconfig.h is empty
* Messages for package dev-qt/qtxml-5.15.7:
* Generated gentoo-qconfig.h is empty
* Messages for package dev-qt/qttest-5.15.7:
* Generated gentoo-qconfig.h is empty
* Messages for package sys-apps/util-linux-2.38.1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-auth/elogind-246.10-r2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* elogind is currently not started from any runlevel.
* You may add it to the boot runlevel by:
* # rc-update add elogind boot
*
* Alternatively, you can leave elogind out of any
* runlevel. It will then be started automatically
* when the first service calls it via dbus, or
* the first user logs into the system.
* Messages for package sys-apps/dbus-1.15.2:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Some applications require a session bus in addition to the system
* bus. Please see `man dbus-launch` for more information.
*
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/dbus-1.15.2/README.gentoo*
* for future reference)
* Messages for package x11-misc/colord-1.4.6:
* The tmpfiles processor exited with a non-zero exit code
* Messages for package net-misc/modemmanager-1.18.12:
* If your USB modem shows up only as a storage device when you plug it
* in, then you should install sys-apps/usb_modeswitch, which will
* automatically switch it over to USB modem mode whenever you plug it
* in.
*
* To control your modem without needing to enter the root password, add
* your user account to the 'plugdev' group.
*
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/modemmanager-1.18.12/README.gentoo*
* for future reference)
* Messages for package app-alternatives/bc-0:
* This package will overwrite one or more files that may belong to other
* packages (see list below). You can use a command such as `portageq
* owners / <filename>` to identify the installed package that owns a
* file. If portageq reports that only one package owns a file then do
* NOT file a bug report. A bug report is only useful if it identifies at
* least two or more packages that are known to install the same file(s).
* If a collision occurs and you can not explain where the file came from
* then you should simply ignore the collision since there is not enough
* information to determine if a real problem exists. Please do NOT file
* a bug report at https://bugs.gentoo.org/ unless you report exactly
* which two packages install the same file(s). See
* https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
* to solve the problem. And once again, please do NOT file a bug report
* unless you have completely understood the above message.
*
* Detected file collision(s):
*
* /usr/bin/dc
* /usr/bin/bc
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* None of the installed packages claim the file(s).
*
* Package 'app-alternatives/bc-0' merged despite file collisions. If
* necessary, refer to your elog messages for the whole content of the
* above message.
* Messages for package sys-devel/llvm-15.0.6:
* You can find additional opt-viewer utility scripts in:
* /usr/lib/llvm/15/share/opt-viewer
* To use these scripts, you will need Python along with the following
* packages:
* dev-python/pygments (for opt-viewer)
* dev-python/pyyaml (for all of them)
* Messages for package media-libs/mesa-22.3.0:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* CONFIG_KCMP: is not set when it should be.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Messages for package x11-libs/pango-1.50.12:
* media-libs/freetype is installed without harfbuzz support. This may
* lead to minor font rendering problems, see bug 712374.
* Messages for package sys-libs/gpm-1.20.7-r5:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package net-print/cups-2.4.2-r6:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package net-wireless/bluez-5.66:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* To use dial up networking you must install net-dialup/ppp
* Messages for package x11-libs/gtk+-3.24.35:
* Please install app-text/evince for print preview functionality.
* Alternatively, check "gtk-print-preview-command" documentation and
* add it to your settings.ini file.
* Messages for package gnome-base/gnome-keyring-42.1-r1:
* Please select pinentry-gnome3 as default pinentry provider:
* # eselect pinentry set pinentry-gnome3
* Messages for package net-wireless/wpa_supplicant-2.10-r1:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* If this is a clean installation of wpa_supplicant, you have to create
* a configuration file named /etc/wpa_supplicant/wpa_supplicant.conf An
* example configuration file is available for reference in
* /usr/share/doc/wpa_supplicant-2.10-r1/
*
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/wpa_supplicant-2.10-r1/README.gentoo*
* for future reference)
* WARNING: You are building with TKIP support disabled, which is recommended since
* this protocol is deprecated and insecure. If you still need to connect to
* TKIP-enabled networks, you may turn this flag back on. With this flag off,
* TKIP-enabled networks, including mixed mode TKIP/AES-CCMP will not even show up
* as available. If your network is missing you may wish to USE=tkip
* Messages for package x11-libs/gtk+-2.24.33-r2:
* Please install app-text/evince for print preview functionality.
* Alternatively, check "gtk-print-preview-command" documentation and
* add it to your gtkrc.
* To make the gtk2 file chooser use 'current directory' mode by default,
* edit ~/.config/gtk-2.0/gtkfilechooser.ini to contain the following:
* [Filechooser Settings]
* StartupMode=cwd
*
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/gtk+-2.24.33-r2/README.gentoo*
* for future reference)
* Messages for package net-dialup/ppp-2.4.9-r8:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Pon, poff and plog scripts have been supplied for experienced users.
* Users needing particular scripts (ssh,rsh,etc.) should check out the
* /usr/share/doc/ppp-2.4.9-r8/scripts directory.
* Messages for package net-misc/networkmanager-1.40.6:
* To modify system network connections without needing to enter the
* root password, add your user account to the 'plugdev' group.
*
* (Note: Above message is only printed the first time package is
* installed. Please look at /usr/share/doc/networkmanager-1.40.6/README.gentoo*
* for future reference)
* Regenerating GNU info directory index...
* Processed 102 info files.
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items.
* After world updates, it is important to remove obsolete packages with
* emerge --depclean. Refer to `man emerge` for more information.
离线
页次： 1